<aside> <img src="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/f8eea232-86fe-4284-8e99-40d975a46176/Orange.png" alt="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/f8eea232-86fe-4284-8e99-40d975a46176/Orange.png" width="40px" /> Orange Tool: Requires an induction before use. Request an induction here.
</aside>
The Prusa SL1S printer is a DLP resin 3D printer which uses UV light to cure resin onto a build plate. It complements our Form2 resin printer and allows the use of experimental or 3rd party resins, which isn’t possible with the Form2.
We are happy to offer several resins for purchase through the ANU MakerSpace store (costs vary depending on the resin). Alternatively you can buy your own resin and tank, please speak to staff if you wish to go this route.
| Phrozen 4K Grey | $2/10ml | Our standard resin, ideal for any project requiring high detail and moderate strength. | Settings: First layer Exposure:30s Exposure time: 2.5s Speed Setting: Slow | | --- | --- | --- | --- | | Phrozen Clear | $2/10ml | Clear resin, worse mechanical properties than the grey resin. | Settings: First layer Exposure:30s Exposure time: 2.5s Speed Setting: Slow | | Phrozen Nylon Green | $3.50/10ml | Phrozen Nylon-Green Tough resin which produces a nylon-like part | Settings: First layer Exposure:30s Exposure time: 2.5s Speed Setting: Slow | | Casting | $5/10ml | A wax resin which is perfect for casting. | Settings: First layer Exposure:30s Exposure time: 2.5s Speed Setting: Slow |
Prusa Slicer for Resin Printing
‣
‣
