<aside> <img src="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/f8eea232-86fe-4284-8e99-40d975a46176/Orange.png" alt="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/f8eea232-86fe-4284-8e99-40d975a46176/Orange.png" width="40px" /> Orange Tool: Requires an induction before use. Request an induction here.
</aside>
The Prusa SL1S printer is a DLP resin 3D printer which uses UV light to cure resin onto a build plate.
We are happy to offer several resins for purchase through the ANU MakerSpace store (costs vary depending on the resin).
| Resin | Cost | Use case | Settings |
|---|---|---|---|
| Phrozen 4K Grey | $2/10ml | Our standard resin, ideal for any project requiring high detail and moderate strength. | First layer Exposure:30s |
| Exposure time: 2.5s | |||
| Speed Setting: Slow | |||
| Phrozen Clear | $2/10ml | Clear resin, worse mechanical properties than the grey resin. | First layer Exposure:30s |
| Exposure time: 2.5s | |||
| Speed Setting: Slow | |||
| Phrozen Nylon Green | $3.50/10ml | Phrozen Nylon-Green Tough resin which produces a nylon-like part | First layer Exposure:30s |
| Exposure time: 2.5s | |||
| Speed Setting: Slow | |||
| BlueCast X-One | $5/10ml | A wax resin which is perfect for casting. | First layer Exposure:30s |
| Exposure time: 2.5s | |||
| Speed Setting: Slow |
Prusa Slicer for Resin Printing
‣
‣
